Changelog.

Inter::State v1.3.4 adds a loop brace to the rhythmic modulator: a DAW-style region on the large modulation display that sets which part of the editing window actually repeats. Leave it full-width when the whole window should cycle; shorten it for a faster cycle against a longer canvas. The Windows installer and plugin binaries are now signed by Ravine DSP Limited.

Highlights

• Loop brace on the modulation display: drag the ends to resize, or the bar to slide the region. Cycle length can be shorter than Subdivision.
• Ping-pong: overdrag a corner past the one-sixteenth minimum (or Shift+click the brace) to play forward then reverse; one full ping lasts twice the brace length.
• With Retrigger Off, Ping-pong still completes at least one round-trip—including on a full-canvas brace.
• Fixed dragging a selection box around curve-modulator nodes while zoomed in on the large display: the box now follows the pointer. Previously it sat farther from the cursor the more you zoomed.
• Under the hood housekeeping on Slot Scenes—same switching, morphing, and save behaviour.
• Windows: the installer and included plugin binaries are now digitally signed by Ravine DSP Limited, so Windows can show a known publisher instead of treating the download as unsigned.

Inter::State v1.3.3 pairs with Inter::State[Bridge] v1.1.5 for small usability fixes around modulated macros and Bridge Direct CC tiles: quieter clicks when selecting modulated macros, a reliable switch to the modulation visualiser after loading a session, no false dial shake when changing Macro / Mixer page, and correct Bridge window height when you collapse an expanded tile or reopen a saved session. It also fixes Bridge-driven mixer controls (such as Gain Widen) that stopped responding after loading a saved session.

Highlights

• Fixed Bridge controlling a mixer setting through a mapped Main and Slot macro after loading a saved session: moving Bridge now moves that mixer control again right away. Previously the Main and Slot dials could still move while the mixer control stayed stuck until you clicked something in the Inter::State window.
• When a macro is being modulated (or driven by another modulated macro), clicking it to open its settings no longer makes the dial shake. The shake still appears if you try to turn or drag it by hand, use the mouse wheel, type a new value, or flip a switch—so you can open the editor to adjust modulation without feeling like you did something wrong.
• Inter::State[Bridge] (v1.1.5): the same behaviour on Bridge macro dials—click to select is quiet; shake only when you try to change the value.
• Fixed opening a modulated macro after loading a saved session: the visualiser now switches to Osc. and shows the modulation display on the first click, instead of staying on Freq. until you change the visualiser by hand.
• Inter::State[Bridge] (v1.1.5): switching an expanded Direct CC tile between Macro and Mixer no longer makes dials shake. The shake still appears only when you try to change a blocked control’s value.
• Inter::State[Bridge] (v1.1.5): collapsing an expanded Direct CC tile now returns the Bridge window to its compact height. Previously the window stayed tall after you closed the expanded panel, and the InterState 1–8 sliders stretched to fill the leftover space. Reopening a saved session keeps that correct height too (and still remembers if you manually made the window taller).

Inter::State v1.3.2 is a focused visualiser-and-modulation fix release for Multiband / Splitter workflows, Modulator MID behaviour while routing, signal-triggered macro modulation after project load, and Mod-enable audio stability during playback. It also adds a Retrigger On/Off option for signal-triggered modulators, and cuts the delay before the visualiser and main panel appear when opening the editor.

Highlights

• Added Retrigger to modulator Options (below the trigger-slider riser): On (default) keeps mid-cycle restart on each valid hit; Off plays the one-shot through to the end before another hit can start a new cycle. Applies to Input, Sidechain, and Trace 1; greyed out in Loop.
• Fixed the modulator trigger playhead sitting a few pixels ahead of the oscilloscope transport playhead when both should be in the same place. Both playheads are now derived from the same frame of scope timing data, and the trigger playhead marks the transient that fired it rather than the latency-compensated moment the modulation reaches its target.
• Fixed Modulator overlay display when Multiband Splitter view is active: the modulation curve no longer draws on top of the multiband display. The modulator overlay now appears only while you are editing a modulator on the Scope view.
• Fixed Modulator MID when connecting or adjusting Multiband routing in the main panel: if the modulator editor is open, it stays open with its controls intact. Previously the MID could drop to an empty modulator shell while other main-panel routing clicks left the MID unchanged.
• Engaging Multiband routing (preset or Splitter connections) no longer auto-switches the visualiser to Splitter. Scope / Analyzer / Splitter stay under the visualiser tabs (or the Splitter node); routing only changes the audio graph.
• Manual Learn still keeps its MID context when you switch Scope / Analyzer / Splitter tabs, matching the intended Learn workflow.
• Fixed signal-triggered modulation (Sidechain, and related Input / Trace 1 trigger settings) after loading a project: Threshold, Refractory, and Lookahead now take effect immediately on playback.
• Fixed brief audio dropouts when turning on a macro Mod button during playback with latency-inducing plugins already loaded. Ordinary Loop modulators no longer interrupt audio on enable; a short interruption when instance look-ahead actually changes remains expected host delay compensation.
• Clarified typed value entry on macros: double-click the dial or slider body still opens typed entry for continuous and stepped macros, but not for switch macros (body stays click-to-toggle). Switch macros still accept On / Off via the dial value readout. Inter::State[Bridge] Macro-page mini dials follow the same rule.
• Improved editor load time: the visualiser and main panel now appear noticeably sooner when you open the editor or restore a saved session. Reopening the editor later in the same session is quicker again.

Inter::State v1.3.1 pairs with Inter::State[Bridge] v1.1.4 so Scene Crossfade macros show the same scene launch buttons on the Bridge Direct CC Macro page that you already use in Inter::State.

Highlights

• Inter::State[Bridge] (v1.1.4): when a Direct CC macro is in Scene Crossfade mode, the mini dial is replaced by a compact 2×4 scene button grid. Click a filled scene to start the same timed, transport-synced crossfade as in Inter::State; empty scenes stay inactive, and source/target glow follows the blend while a crossfade is running.
• Fixed a conflict where a macro dial mapped to a plugin control could still be pushed around by Slot Scenes under External scope. Mapped controls now stay under the dial while you switch, morph, or crossfade scenes.

Inter::State v1.3.0 and Inter::State[Bridge] v1.1.3 add Slot Scenes: a per-slot bank of eight recallable states so a single hosted plugin can switch, morph, or timed-crossfade between tonal setups instantly, without reloading anything or touching routing. Map Scene Selector, Scene Morph, or Scene Crossfade from the Slot MID Scene Target. This release also adds Slider view to the macro panel so you can see and perform all eight macros at once, plus typed value entry via double-click on dial/slider bodies (and on the Inter::State[Bridge]). Signal-triggered modulation (Input, Sidechain, and Trace 1) now behaves as a true envelope-style one-shot: the curve waits for your Threshold, plays once, then rests at the start until the next hit. Beyond those headline features, it includes a wide set of workflow and UI improvements: clearer AutoMap / Manual Learn behaviour, compact slot-parameter labels, smoother preset load and browse flows, host window resize and macro menu fixes, visual polish across tabs and the mixer, and spectrum-analyser cleanup—see the highlights below.

Highlights

• Added Slot Scenes: every slot now carries a bank of eight scenes in the Slot MID Scenes page, each storing the hosted plugin's parameter state (and optionally the slot mixer under All capture scope). Scenes auto-capture as you leave them, switch instantly from the strip, copy/paste/clear from the right-click menu, and travel with the slot at every preset tier.
• Added Scene Target quick-map on the Slot MID Scenes page to attach a slot macro as Scene Selector (step through filled scenes), Scene Morph (blend adjacent filled scenes), or Scene Crossfade (timed, transport-synced blend from the active scene to a chosen filled target, with musical duration from Sixteenth through One Bar). Clear removes the scene-mode mapping. Scene modes are assigned from Scene Target only—not from the Macro MID Continuous / Switch / Steps menu.
• Scene Crossfade turns the mapped macro into scene launch buttons (dial or slider layout) so strip clicks and macro buttons start the same timed blend to a chosen scene.
• Scene Selector, Scene Morph, and Scene Crossfade respond to host automation, MIDI / Inter::State[Bridge], and the rhythmic modulator where applicable.
• Added Slider view for the macro panel: use the + / − rail above the strip to switch between Dial view (four dials per page) and Slider view (all eight macros in a 2×4 grid). Your layout choice is remembered separately for Main, each rack, and each slot; mappings, modulation, MIDI, and macro values are unchanged either way.
• Added typed value entry for macros: click the dial value box to type an exact value, or double-click a dial or slider body for the same (including On/Off for switch macros); press Enter to apply.
• Inter::State[Bridge] (v1.1.3): double-click typed value entry now works on Direct CC Macro-page mini dials and the Inter::State 1–8 sliders. Direct CC Mixer-page double-click still resets Gain / Volume / Pan / Widen to default.
• Improved signal-triggered macro modulation (Input, Sidechain, and Trace 1): when the signal crosses your Threshold, the modulation curve plays once for the current beat subdivision, then returns to the start and waits for the next hit. If nothing crosses the threshold, the dial stays at the start of the curve instead of keeping looping on its own.
• Improved modulator Lookahead and latency alignment: Lookahead now delays Inter::State audio by the same amount reported to the host so the track stays locked with the rest of the project; Slot and Rack MID latency readouts include Lookahead where you use it; the scope stays beat-aligned; and signal-triggered shaping stays in time with latency-inducing plugins while still retriggering cleanly on each hit.
• Improved plugin scan results for FX workflows: AU MIDI FX plugins are now automatically excluded from the Inter::State plugin list, while valid audio effects remain available.
• Fixed plugin editor resize behaviour when using the host's title-bar controls: maximising the Inter::State window now keeps the full square interface visible on screen, and restoring the previous size no longer leaves panels and controls misaligned.
• Fixed MID panel titles so their text size updates correctly while you resize the plugin window.
• Fixed macro parameter-selector menus: the parameter list now closes when you click the chevron again, search text no longer clips letter bottoms, and filtered options keep their framed button styling while you type.
• Fixed saved macro mapping recall when loading a plugin: the Use Saved / Learn Fresh prompt now appears before the hosted plugin editor opens, Learn Fresh follows your Main Menu AutoMap default, and the AutoMap button reflects the active state.
• Shortened slot-parameter display names so macro idle labels and host automation lanes stay compact.
• Fixed Manual Learn when AutoMap is already on, and prevented AutoMap learn from picking up controls that only report MIDI CC values for display.
• Removed the success confirmation dialog after loading a preset and kept the preset browser open after loading so you can try another without reopening it.
• Loading a global preset now switches the UI to Main context first.
• Refined notification, rack-tab, visualiser-selector, and mixer Phase-button presentation.
• Fixed Main macro dials mapped to mixer Phase buttons so they use switch mode.
• Fixed a brief dark flash when rapidly moving plugins and a crash when removing a plugin during playback.
• Fixed spectrum analyser artefacts in Multiband Split view and improved OpenGL performance for visualiser and cable displays.
• Fixed Swing and Zoom drag behaviour in Osc. CONTROL and prevented playback dropouts while adjusting them.

Inter::State v1.2.3 is a focused workflow-and-usability update across slot actions, visual responsiveness, and modulation reliability.

Highlights

• Replaced the in-slot quick menu with a direct clear-state slot action: click the slot number to arm clear, then click the in-slot clear button.
• Improved oscilloscope and spectrum-analyser visual smoothness and responsiveness.
• Fixed Mixer Pan value readout clarity at scaled UI sizes.
• Improved Modulator trigger Threshold slider feel with finer control in low-threshold ranges.
• Fixed a playback-time macro-mapping feedback issue that could override modulated macro values.
• Fixed AU project reopen so the saved rack/slot focus and MID view restore correctly.
• Windows installer now bundles and auto-runs the Microsoft Edge WebView2 bootstrapper when required for Inter::State[Bridge].

Inter::State v1.2.2 is a focused modulation-stability update that improves realtime behaviour while shaping modulation during playback.

Highlights

• Dragging nodes in the Modulation Curve editor now updates audio in realtime.
• Dragging Min/Max curve nodes now updates mapped targets while you drag.
• Improved signal-trigger stability while adjusting Threshold, Refractory, and Lookahead during playback.
• Improved modulation edit reliability across live workflows, including undo/redo and context transitions.

Inter::State v1.2.1 is a focused maintenance update that improves host preset recall reliability, fixes Inter::State[Bridge] Direct tile stale-state behaviour during host preset swaps, and improves Modulator MID dot-page navigation.

Highlights

• Fixed a crash during host preset recall on a slot with a mapped macro.
• Fixed saved rack routing failing to restore during host preset recall.
• Fixed Inter::State[Bridge] Direct tiles remaining as stale greyed-out entries after host preset recall.
• Improved Modulator MID bottom dot-page navigation.

Inter::State v1.2.0 and Inter::State[Bridge] v1.1.2 introduce signal-triggered macro modulation, expanded modulator controls, macro paging, first-touch mapping, AutoMap and routing refinements, improved Inter::State[Bridge] editor-resize reliability, and spectrum analyser accuracy improvements under large host processing buffers.

Highlights

• Added signal-triggered macro modulation with Input and Sidechain modes, Threshold, Refractory, and Lookahead controls.
• Added Trace 1 trigger mode and clarified trigger-source behaviour in the modulation scope.
• Macro panel paging now behaves per slot and resets appropriately when clearing or replacing a plugin.
• Fixed click-to-map in Manual Learn and AutoMap so the source macro immediately matches the target parameter.
• Fixed slot Clear so the AutoMap button displays the correct OFF state.
• Fixed a routing hover visual gap after resizing.
• Fixed spectrum analyser accuracy under large host processing buffers.
• Inter::State[Bridge] v1.1.2 improves AU editor resizing and preserves user-resized window dimensions.

Inter::State v1.1.6 is a focused, important fix for Dry/Wet phase alignment when using plugins that add their own processing latency.

Highlights

• Fixed Dry/Wet alignment so dry stays correctly in phase with wet as soon as a latency-introducing plugin is loaded.
• The fix applies to both per-slot and per-rack Dry/Wet mixers and restores alignment when reopening saved sessions and presets.

Inter::State v1.1.5 and Inter::State[Bridge] v1.1.1 form a focused stability update that improves plugin window reliability, refines the slot quick menu, and keeps Splitter controls updating smoothly while you drag.

Highlights

• Hosted plugin editor windows now reopen at their last position.
• Fixed realtime EQ band gain and crossover rendering in Splitter view.
• Fixed Splitter traces failing to refresh when enabling bands.
• Replaced the right-click menu with an in-slot menu opened from the slot number.
• Inter::State[Bridge] plugin-name clicks now toggle hosted plugin windows with a true single click.
• Inter::State[Bridge] now preserves drag-resized editor dimensions.
• Inter::State and Inter::State[Bridge] now run on both Apple Silicon and Intel Macs.

v1.1.4 is a reliability update focused on AutoMap preset recall, slot/workflow stability, and more consistent slot interaction behaviour after hosted plugin resizing.

Highlights

• Fixed stored AutoMap mappings failing to recall on the next plugin load.
• Stored mappings now reliably recall in AU workflows and restore macro dial positions.
• Fixed a rare crash during slot move/reorder workflows.
• Fixed interaction deadzones after plugin resize/state changes.
• Fixed the spectrum analyser cursor overlay intermittently disappearing.
• Improved Macro and MID dot-page navigation affordances and click targets.

v1.1.3 is a maintenance release focused on plugin-loading, slot quick-action reliability, editor-opening reliability in Steinberg WaveLab and Logic Pro, and hosted plugin UI compatibility.

Highlights

• Restored direct MIDI routing visibility in DAWs.
• Fixed a WaveLab input channel layout error.
• Fixed Inter::State editor opening on mono tracks in Logic Pro.
• Improved same-slot quick-action reliability.
• Improved hosted plugin UI scaling and interaction compatibility.

v1.1.2 makes slot workflows faster with quick right-click actions, clearer slot status labels, smoother hosted plugin window behaviour, better Inter::State[Bridge] reliability, and clearer macro naming in mapping UI.

Highlights

• Added a slot right-click quick menu with Solo, Bypass, Replace/Load, and Clear actions.
• Added slot-title status labels and improved text fitting.
• Loaded plugin editors can be toggled with repeated single clicks.
• Improved plugin editor toggle reliability.
• Improved Inter::State[Bridge] responsiveness and shutdown reliability.
• Fixed custom macro names in mapping confirmations and selectors.
• Editor window size now persists after drag-resizing.

v1.1.0 brings expanded MIDI control, better third-party plugin compatibility, improved latency-handling reliability, and a round of UI and performance improvements.

Highlights

• Direct MIDI mapping and Inter::State[Bridge] slider learn now support MIDI Note and Polyphonic Aftertouch.
• Improved compatibility for sidechain detection and inconsistent latency reporting.
• Fixed wet/dry sync related to latency compensation and graph rewiring.
• Reduced redundant macro-update traffic and modulation overhead.
• Improved UI and Inter::State[Bridge] responsiveness.
• Improved reliability when closing sessions with active Inter::State[Bridge] communication.
• Reduced animated redraw cost and fixed several UI bugs.

Inter::State v1.0.0 initial release.